Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Houston
A new garage door installation in Houston typically runs $700-$2,200 depending on door size, material, and whether the existing frame needs correction for clay-soil movement. Most double-car steel installations in Houston’s older suburbs finish in one day, with a flat written price agreed before any work starts.
We serve Houston from our local metro office, dispatching crews daily to neighborhoods from Meyerland and the Energy Corridor up through Spring and Humble. If your garage door is original to a 1980s or 1990s tract home in Katy, Sugar Land, or Pearland, you’re likely working with a door, spring set, and opener that have all exceeded their design life. The question isn’t whether you’ll replace them - it’s whether you keep paying to repair components that were never built to survive Houston’s humidity and clay-racked frames.
Call (346) 703-6675 for a free measure and written estimate. We photograph the existing opening and any failed components before quoting, per Clause 4 of The Haven Standard.
Why Servo Garage Doors Tomball Is Houston’s Preferred Garage Door Installation Company
We’ve made right more than 18,000 garage doors since 2015, every one with a written price before work started and a documented photo record when the technician left. In Houston specifically, that documentation matters more than in most markets - because the failed part is often hidden by humidity corrosion or flood damage, and the frame is often out of square from Beaumont clay heave.
Our Houston customers find us after reading the three-star reviews of competitors who quoted one price and invoiced another. They stay because Clause 1 of The Haven Standard means the price you sign is the price you pay - no exceptions, no “we found something else.” Our technicians are background-checked and uniformed, and our license number is on every page, not buried in fine print.
Calls to (346) 703-6675 are answered by a live person 24/7, including holidays. Emergency or scheduled, you get a named technician and an on-the-way text, not a callback window.
Our Garage Door Installation Services in Houston
New Door Installation
Most new door installations we handle in Houston are replacements for original doors in homes built between 1975 and 2000 - the peak of the city’s suburban expansion across Katy, Sugar Land, Pearland, and the Bay Area. These doors are typically 25-40 years old with brittle bottom seals, rusted bottom brackets, and extension spring systems that were under-specced even when new. We measure the opening with a laser level, check for slab-racked framing, and quote a flat price for the door, hardware, and any frame correction before we order anything.
Because Houston’s Beaumont clay moves with every wet-dry cycle, garage door frames here rack out of square within a few years, so replacement doors must be installed with adjustable jamb brackets and re-shimmed after seasonal soil movement - a step drier inland Texas markets almost never need. We build that follow-up into our scope.
Single Car Door
Single-car garage doors in Houston’s older neighborhoods like Bellaire and parts of the Heights often date to the original construction and are still running one-piece wood or early steel sectional designs. These doors are lighter but use hardware that hasn’t been manufactured in decades. When the track bends or the bottom bracket rusts solid, repair parts simply don’t exist. We evaluate whether a retrofit is possible and quote a new door installation when it’s not.
Double Car Door
Double-car doors are the majority of our Houston installation work. A 16-foot steel sectional door on a two-car garage weighs 150-350 pounds depending on insulation and gauge, and the original torsion spring was specced for a 10,000-cycle life - about 7-10 years of normal use, less in Houston’s humidity. When that spring snaps, the opener strains, the cables fray, and the door becomes a safety hazard. We install 25,000-cycle torsion springs as standard on double-car replacements, with galvanized cables and wind-rated hardware where code requires.
Custom Garage Door
Custom installations in Houston center on two requests: carriage-house styling for curb appeal in neighborhoods like the Heights and Montrose, and flood-resistant specifications for homes in Meyerland, Friendswood, and parts of the Energy Corridor that have seen repeated water intrusion. We source custom doors from Clopay and Amarr with composite or aluminum construction that won’t warp like wood after flooding, and we spec stainless steel hardware and sealed-bearing rollers for humidity resistance.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Houston
We install and service Wayne Dalton, Craftsman, Raynor, and LiftMaster systems, with steel doors from Clopay and Amarr in stock for Houston customers. Our warehouse carries common torsion spring sizes, cable sets, and opener logic boards for same-day repair on legacy hardware - critical when you’re dealing with a door that won’t close before a storm. For new installations, we order custom sizes with a 5-7 day turnaround, or faster for wind-rated replacements after permit approval.
Common Garage Door Installation Problems We See in Houston Homes
- Clay-racked frames throw off new doors within seasons. Beaumont clay heave racks the framed opening out of square, so a perfectly installed sectional door loses door balance and weather seal contact within a couple of seasons, causing repeat track alignment calls. We install adjustable jamb brackets and schedule follow-up shimming.
- Humidity-corroded springs snap and are mistaken for opener failure. A 25-40 year old original torsion spring in a Katy or Sugar Land tract home snaps after years of Gulf Coast humidity corrosion, and the opener - not the spring - is blamed for straining on a 150-350 lb double door. We test spring balance before quoting any opener work.
- Pre-Ike doors fail current wind-load code on permitted replacements. Pre-Ike doors in Meyerland, Friendswood, and the Energy Corridor were never rated for the 120+ mph wind loads now required, so a repair job often uncovers a code-upgrade obligation the homeowner didn’t know about. We pull permits and spec wind-rated hardware where required.
- Flood-warped panels and rusted bottom brackets in repeated-flood zones. In repeatedly flooded neighborhoods, technicians routinely find lower door panels warped from multiple flood events and bottom brackets rusted completely solid - damage that looks like a simple repair but requires full replacement.
Pricing for Garage Door Installation in Houston, TX
We publish ranges because Clause 1 of The Haven Standard requires a written, flat price before any work starts - and that price can’t be written until we measure your opening and photograph any existing damage. Here’s what new door installation and common related work costs in the Houston market:
| Service | Price Range in Houston |
|---|---|
| New Door Installation | $700-$2,200 |
| Spring Repair (torsion or extension) | $180-$340 |
| Cable Repair | $130-$250 |
| Panel Replacement | $250-$500 |
| Track Realignment | $120-$240 |
| Garage Door Repair (general) | $150-$600 |
What moves you within these ranges: door size (single vs. double), material (steel, wood, composite), insulation rating, wind-load rating for coastal and flood-zone jurisdictions, and whether the frame needs correction for clay-soil racking. A basic uninsulated single-car steel door on a square frame runs toward the lower end. A wind-rated, insulated double-car door with frame correction and hardware upgrade runs higher.
Every estimate is free. The price we write is the price you pay. Call (346) 703-6675 to schedule a measure.
We Also Serve Cities Near Houston
Our crews work daily in Houston and surrounding communities including Bellaire, Humble, Spring, and Katy. Dispatch and scheduling are coordinated from our Houston metro office. Whether you’re inside the Loop or out in the suburban corridors, the same technician standards and Haven Standard documentation apply.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Houston
If the door, springs, and cables are all original, replacement is usually the better value. A 40-year-old door in Houston has endured decades of humidity corrosion, clay-racked framing, and possibly flood exposure - and replacement parts for pre-1990 hardware are often obsolete. We offer a free second opinion on any competing written estimate; bring the paperwork and we’ll compare scope and price line by line. Call (346) 703-6675.
Houston’s Beaumont clay expands and contracts with every wet-dry cycle, racking garage door frames out of square seasonally. A standard installation on a fixed bracket will drift. We install adjustable jamb brackets and build in re-shimming as part of our scope - something our Garage Door Installation team documents in every Houston replacement quote.
If your home is in Harris County or a surrounding jurisdiction that adopted post-Hurricane Ike requirements, any permitted replacement must meet 120+ mph wind-load standards. Many pre-2008 Houston homes still have original doors that don’t qualify. We check permit requirements before quoting and spec wind-rated hardware where code demands it. The upgrade adds cost but eliminates inspection failure and potential insurance issues.
The torsion spring does 90% of the lifting; the opener just guides the door. When a spring snaps or loses tension from humidity corrosion, the opener strains against 150-350 pounds of dead weight. Replacing the opener without addressing the spring burns out the new motor in months. We test spring balance first and photograph the failed component before quoting any work, per Clause 4 of The Haven Standard.
Steel, with proper gauge and coating, outlasts wood in Houston’s 80-90% humidity and flood-prone zones. Wood doors warp, rot at the bottom panel, and require regular refinishing. We recommend insulated steel with composite overlays for homeowners who want carriage-house styling without wood’s maintenance burden. For flood-zone homes in Meyerland or Friendswood, we spec aluminum or composite construction with stainless hardware.
Written by Marcus Deller, Owner at Servo Garage Doors Tomball, serving Houston since 2015.